Meridian Unplugged - Powered by MrTechGuy.co.uk Forums Thread Like Summary - Axis setting

I have a friend who has an 861 and he says that every time he starts his 861, after it has been turned off, Axis is set to -1, but he wants it to start with Axis -2. Have tested mine too and it behaves the same way.

I have read through all the manuals and searched the forum, but I can't find out how to set Axis in the Meridian Configuration program, from what I understand you can only set it via the buttons on the 861 front panel.

Are there any other ways to do it?

I have read on the Wiki that it is a workaround but is not a good idea to set Axis individually on each speaker but just let the 861 processor control it. Wiki Axis

This is from the manual "Meridian DSP Loudspeaker
User Guide" side 32:
If you have a Meridian Surround Controller these
functions are performed via the surround controller.

But my friend wants it to start at Axis -2 after the 861 processor has been turned off. Anyone have any ideas?

I have mine set to +1 because my ears are about in line with the displays of 5200.

I am the one who finds the difference noticeable, it’s subtle but there.

Ian