Meridian Unplugged - Powered by MrTechGuy.co.uk Forums Thread Like Summary - Comms Cable Repair Help

I have an old pair of 5200s (non-speaker link) and a 568. I managed to damage one end of the M comms cable (the end that connects to the 568) and detach the wire from the DIN plug. Can anyone please advise what the correct connections are to solder the cable back onto the plug?

As a major note to add to the PDF document - these are shown from the BACK, not the front. So this is how you'd be looking at them if you were soldering the wires to the pins inside the connector ----- NOT facing the connector like you are testing the pins with a multimeter.