Meridian Unplugged - Powered by MrTechGuy.co.uk Forums Thread Like Summary - Making a custom AC12 type unit

Hi All,

The key pieces of kit are now here for my Atmos setup (minus the cable and 250mm hole saw). Many thanks to Rick at Audio Images for supplying my 271.

I now need to connect my non speakerlink kit to the 271. Whilst the AC12 is available - having 5 of them will prove to be quite pricey and the Reviver appears to no longer be made. I have reviewed the thread here https://www.meridianunplugged.com/u...bb=showflat&Number=178875&page=1

In principle it all seems straight forward and I plan to purchase a few patch panels and make a custom box. The Lundahl 1574 transformer seems to be transformer to use.

Has anyone had any experience of making something like this on a larger scale ?

Thank you all in advance.

An AC12 or Reviver(s) will work … for DIY solutions checkout this topic …

SpeakerLink used as Digital Out (XLR or SPDIF) plus COMMS and RS232

Regards,
Carl

I can confirm that make for DIY was great.

I used this FS: Passive SpeakerLink to RCA Adapters, thread as an example.

The Neutrik boxes are great !

I only used a different Neutrik box, which has RJ45 CAT6A on one side, and SPDIF 75 Ohm on the other one.