Meridian Unplugged - Powered by MrTechGuy.co.uk Forums Active Threads This Week

For Device Manager, you need to use a Windows 10 machine. The software still appears to depend on an older version of .NET and may not work properly under Windows 11.

At least, that has been my experience.

Cleaning things out! When I mothballed this D704 12 or more years ago it was working fine. CD and LaserDisc.

More info: https://www.lddb.com/hardware/0534/laserdisc/Pioneer/CLD-D704

I think I have the remote and I imagine I have a power cable (it's a standard jobbie). Not sure I have the manual - 50/50 odds.

Free to any Hitchhiker who can come pick it up.

Doody

I've got these two pieces that have been gathering dust for quite some time (like, a dozen years, probably more).

Just the units. No boxes, cables, remotes, manuals, or anything.

562V: As far as I can recall, it worked perfectly when I mothballed it.

598: I am fairly certain it was modded with the SDI-out. Before it was decommissioned, I seem to remember it had the flaky open/close problem many (most? all?) 598s had back then.

Happy to give them to a fellow Hitchhiker - as long as you come pick 'em up.

LMK!

Doody

Replace the LM317. They do go bad and don't hold voltage.
Buy a higher spec model.

Been poking around inside my Ellipse for a bit, trying to create an app that avoids the slowness of the Meridian Control iOS app. So far (running on macOS, will port to iOS later):



From top to bottom:

- Album Art (+background fade in color palette)
- Progress bar with scrubber (contrasting color from artwork palette)
- Streaming source + audio format
- Metadata + track controls
- Volume slider
- Volume presets (configurable in settings, collapsible)
- Source selection
- EQ settings (surprising find: loudness + full equalizer, collapsible)
- Display brightness
- Power/Standby

The Meridian specific DSP presets (FREE-Q, BASS & SPACE, IMAGE ELEVATION) are elusive as of yet. But yes – it's lighting fast. Not sure if this will work for 210/218 as well – it is talking to the StreamUnlimited interface (and a little bit of Meridian IP control).

Up to Lexington 125 - Feel sick and dirty more dead than alive

it's always been confusing

Following sales my updated remaining items available:

2 x Meridian MSR+ Black Remotes all boxed in excellent condition

1 x Meridian 800 Series 30mm rear blanking plate

4 x 35MM diameter black round feet, I think they are for mounting DSP5500s on a wood or concrete floor

4 x 75mm diameter silver round feet with rubber ring surrounds for DSP8000 speakers

I'm happy to email pictures of all items to HH enquirers

In addition I have the following Meridian related items (all new and unused):

1 x 1M StarTech.com Serial Cable, for connecting to the Keyspan adapter
3 x 2M StarTech.com Serial Cable, for connecting to the Keyspan adapter

I leave these connected to each of my Meridian processors etc so that it is easy to connect up the Keyspan adapter. I bought these items for another system that didn't proceed hence they are now spare.

These unsold items are also on eBay.

All enquiries welcome.

Does the XE performance pack for DSP 8K use/enable extended bass feature (Meridian E3 Bass)?

Gianni, I suggest watching The Real Reason Dolby Atmos Disappoints that answers your questions on why Atmos may or may not work for you, compared to installing an Atmos system that actually delivers.

I’ve used Diskgenius with success. I could even access and copy the songs with it

Horrific! Beaten to death by 21 hammer blows to the head by the assailant, who has subsequently been formally charged with her murder and remanded in custody at The Old Bailey.

Hi Ian,

It's probably the digital 'clipping' light (which should be yellow).

This can occur when the recording engineer has exceeded 0dB within the digital domain.

If it only happens on certain tracks, then it's probably nothing to worry about.

Hope that helps.

Cheers,

Steve

I can’t see them keeping the 800 design, at least physically. Aside from the fact it’s dated, the card-based architecture only makes sense with multichannel, and we know that, sadly, Meridian won’t be doing that any more. I would guess a completely redesigned endpoint both aesthetically and technically. I do wonder, now that they won’t be releasing another surround processor, whether they will consider using some of their proprietary tech, such as Trifield, MRC and possibly sub management, in their flagship stereo endpoint. I really do hope, if it’s something along these lines, that they get a decent designer in, someone worthy of Allen Boothroyd’s legacy. The last few products look like they were designed by a student doing work experience.

When I still had my DSP7200SE and was experimenting with a DSW, Rick gave me a good advice; just go 8K. I wasn't ready at the time. The 7200's + DSW where great, but he was right all along. 8K was what I was looking for.