Pat,

On the Legacy programme, you will also need to select multichannel for any audio source being fed into the 568.mm2 from the HD621 on MHR.

I set up a HD621 with an 861 and you have no sound until you right click the source properties and choose MD1 or MD2 in the audio input tab, depending where your HD621 is connected. These are not changed automatically simply because you are changing things in the HD621 settings. Many people have wasted lots of time due to this and it SHOULD be mentioned in the manual but is not.

Linear PCM should be selected with 6 channel and you don't need the separate coax connected to the 568.2mm. If Dolby Digital or DTS is not decoded by the player, it will just pass through on the 1/2 connection and be decoded by the 568.mm2.


Cheers,


Steve

#1: 8000s, 5500HC, 8000s, 861v8, 800Dv4, HD621
#2: 6000s, 6000C, 5000s, 6000s, 568.2mm, 598DP, 511
#3: 5500s, 5000C, 5000s, 561, 800v3, 518