Proton,
861 must be set as controller in your setup.

This can be done automatically by pressing "Clear" on the remote with the system in Standby. Note all units must "see" the remote when you do this.

The 861 Display should show "Controller" and 800/DSP5000C should show "Not con".
If you do not get this correct repeat pressing "Clear" until ok.

If you can not get 861 to be (the only) controller you can do this manually using the Meridian setup program. Set 800 to "Not con." You can keep 861/Dsp5000C as automatic.

Geir.

Geir

861v8, 504, 2*DSP8OOO.2, 4*DSP5200, F80, Barco CineVersum Blackwing two, DVDO VP50Pro, Sooloos Control-15 & Twinstore, Oppo-BDP103EU,
HD621, Dune HD Base 3.0, Apple TV, Mac Mini