Originally Posted by jack d
I suppose M think that the dealer will do all this for most people but those of us around here want to do it ourselves.

Just listening to my music server. Maybe I'm imagining it but the SQ is much better than just running directly into my G68. More open, transparent......

Two points:

1. The local dealer where I live will indeed set it up but it is hiot or miss -- depending onhow busy they are -- as to whether or not they are willing to stick around to make sure that everything is as it should be...the good news is that this forum exists for such purposes.

2. I am unclear about your post for two reasons but which to confirm the following:

a) On DD5.1 the bitstream signal is being sent via HDMI to the HD621 and then to the G68 where it is decoded with the G68 display showing the information/message that it was showing when the source was connected to the G69 via coax/optical (i.e. DD 5.1 Cinema...)

b) On DD-TrueHD the decompressed/LPCM signal is being sent via HDMI to the HD621 and then to the G68 where with the G68 display showing that the signal has been upsampled to 96Khz (i.e. MHR 96KhZ Cinema...)

Thanks in advance..


Audio: Triad Monitor Golds, Surround Golds, Silver Subwoofers; Procella P-18 Subwoofer; QSC DCA 16622s, 1644, 3422, BASIS 922uz; ADA MACH IV B
Other: APC S-15s; Crestron
Sources and Video: Ran out of characters .....................