Originally Posted by Steve Marinoff
Gary,

This may be a dumb question but for the benefit of us Aussies and Brits, would the Edge be capable of receiving and processing PAL video signal inputs either on component or HDMI ?


Cheers,


Steve


Steve, the Edge is a middle level video scaler, much better in comparison to stuff like a receiver or pre-amp with scaling built it, you can do pretty much anything you want, full PAL capability including conversion to and from NTSC if you need it, you name it this thing will probably do it

take a look at this spec sheet:

http://www.anchorbaytech.com/docs/pdf/DVDO_EDGE_Datasheet.pdf

5 rear HDMI 1.3 inputs and one on the front, all sending your PCM audio via the 4x SPDIF mod, being the unit has a second audio dedicated HDMI output the PCM audio is always flowing so you can connect your display to the main HDMI output with no consequence or care to the PCM output mod, those that want this as a nice audio only unit need not connect anything to either HDMI output and the mod still functions as needed, you simply switch sources, though most people will enjoy the video side as a bonus if they don't have a scaler already

thanks Steve

-Gary

-Gary Murrell
http://www.custom-ht.com/oppopowerbuy.html
My Personal HT setup