I just wanted to add again that control point should be selectable down to 10 Hz, not just 15 Hz as is currently provided. If Meridian can make the room correction selectable down to 10 Hz, that would be very important. Please keep me advised on the ability to have room correction control down to 10 Hz selectability.

I'm currently (slowly but surely) designing a 20'W x 30'L x 12' H custom room which will have a huge custom Infinite baffle. I will at some point be organizing a large group purchase for a run of 75-100 subwoofer drivers which as designed from the ground up to be ideal for infinite baffle. There are three-four driver manufacturing companies are willing take on this custom driver project, but would require a run of 75-100 drivers minimum.

Infinite baffles are one of the most amazing subwoofer designs available. A custom driver designed exclusively for IB use means a large Vas, Qts of 0.5, Fs of around 14 Hz. This will not take place until the 'near' future, but certainly around the time Meridian 4.0 upgrade will be available (2 years?).

In any case, please include control to 10 Hz and keep me advised of any updates on the development of the room correction software.

Sincerely,

Chris

[This message has been edited by Health Nut (edited 06-08-2002).]

7.1 System