|
|
Joined: Mar 2005
Posts: 1,053 Likes: 1
Pan-dimensional being
|
|
Pan-dimensional being
Joined: Mar 2005
Posts: 1,053 Likes: 1 |
Just a heads up on the CLUX in that there appears to be an EDID problem with:
Toshiba HD-A35->CLUX->JVC RS1
A user is only getting 2 channel audio in this setup. I tried to duplicate the problem and can't get any audio from the above chain. The A35 works fine with HD-A35->Radiance->CLUX->Radiance.
If I find any other compatibility issues I'll post them.
Shawn How about adding a DVI Detective Plus then? It can not only store the EDID from the projector/display but also has four "ready-made" EDID's to select from (DIP switches) for cases like this, I believe. And it forwards HDCP.
HD621, G98DH, G68ADV, Bc Acoustiqe ACT A3, 5200C DSP33, NuForce Reference 9 monoblocks, 2x SB3's, Velodyne DD-15 & DD-12 Subwoofers and a Meridian sub.
|
|
|
|
|
Joined: Aug 2007
Posts: 341
Hitchhiker
|
|
Hitchhiker
Joined: Aug 2007
Posts: 341 |
That is an interesting little box. Being DVI it should not be able to carry audio (and the CLUX apparently has a problem with DVI sinks) but it the manual states the EDID it presents has options for audio in it. So it may be sort of quasi-HDMI. It also sounds like it may act as a sink as well.
The built in EDID framerates are limited to 50/60hz though.
Shawn
.
|
|
|
|
|
Joined: Aug 2007
Posts: 341
Hitchhiker
|
|
Hitchhiker
Joined: Aug 2007
Posts: 341 |
Did a little more searching on the DVI Detective Plus and one of Gefen's tech support people claim it is designed strictly for video EDID, not audio. http://forum.gefen.com/topic.asp?TOPIC_ID=8232Gefen's tech support doesn't always seem to be 100% accurate.... Shawn
.
|
|
|
|
|
Joined: Oct 2007
Posts: 175 Likes: 2
Hitchhiker
|
|
Hitchhiker
Joined: Oct 2007
Posts: 175 Likes: 2 |
Apologies if this is a completely stupid question, but if I have a G91A (and not an 861 or G68) will this still work?
Z0: 861v8+ID41+Roon on a QNAP, Naim NAP300, Sonus Faber Amati Anniversario
Z1: Arcam AVR-450, Oppo BDP-103D, SkyQ, Apple TV, Kuro KRP-600A, Sonus Faber Guarneri Memento & Cremona Center M speakers, Martin Logan Descent-i Sub, 2 B&W wall speakers
Z2-6: Roon controlling MC600 Zones into Parasound amps to B&W ceiling speakers
|
|
|
|
|
Joined: May 2000
Posts: 8,364 Likes: 14
President of the Imperial Galactic Government
|
|
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364 Likes: 14 |
It's not a stupid question but the answer is unfortunely no. The G91 does not have a digital multi-channel input.
Lowest end unit is a G61 or 568.2.
- Fiddler (IMHO)
If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
|
|
|
|
|
Joined: Apr 2004
Posts: 12,733 Likes: 88
Don't Panic!
|
|
Don't Panic!
Joined: Apr 2004
Posts: 12,733 Likes: 88 |
To clarify, that's a 568.2MM (568.2 with a multi-channel MHR module).
|
|
|
|
|
Joined: May 2007
Posts: 51 Likes: 5
Mostly harmless
|
|
Mostly harmless
Joined: May 2007
Posts: 51 Likes: 5 |
the CLUX apparently has a problem with DVI sinks I can confirm that. The CLUX doesn't want to work with the HDFury. I even tried changing the HDFury's EDID to no avail. I'm going to order a HDFury2 and try it with that. The HDFury2 should work since it's HDMI rather than DVI. [Addendum: This type of DVI-D interoperability problem, from my research, could be corrected through a software update on the CLUX. Anyone care to pursue that with the folks at CYP?]
Last edited by Netnet; 2008-12-01 19:45. Reason: See Addendum
|
|
|
|
|
Joined: Aug 2007
Posts: 341
Hitchhiker
|
|
Hitchhiker
Joined: Aug 2007
Posts: 341 |
"[Addendum: This type of DVI-D interoperability problem, from my research, could be corrected through a software update on the CLUX. Anyone care to pursue that with the folks at CYP?] "
I sent them an email this morning regarding the A35/RS1 problem. I also suggested adding a feature that the CLUX act as a sink if there is no active display plugged into it.
If I hear back from them I will also mention the DVI issue as well.
Shawn
.
|
|
|
|
|
Joined: May 2000
Posts: 2,307
Senior Shouting Officer
|
|
Senior Shouting Officer
Joined: May 2000
Posts: 2,307 |
Toshiba HD-DVD players are full of bugs.
If i not tell them the disply only understands p24 i get p60. Some moron who programmed it must have thought 60 is better than 24 since the number is higher..
Last edited by jaco; 2008-12-01 20:52.
Sold all M equipment
|
|
|
|
|
Joined: Mar 2005
Posts: 1,053 Likes: 1
Pan-dimensional being
|
|
Pan-dimensional being
Joined: Mar 2005
Posts: 1,053 Likes: 1 |
That is an interesting little box. Being DVI it should not be able to carry audio (and the CLUX apparently has a problem with DVI sinks) but it the manual states the EDID it presents has options for audio in it. So it may be sort of quasi-HDMI. It also sounds like it may act as a sink as well. It carries audio. I know of a couple of people having it between their HTPC source and HDMI reciever, when they turn off their projector the graphics card no longer turns off the HDMI port - and the audio is passed through.
HD621, G98DH, G68ADV, Bc Acoustiqe ACT A3, 5200C DSP33, NuForce Reference 9 monoblocks, 2x SB3's, Velodyne DD-15 & DD-12 Subwoofers and a Meridian sub.
|
|
|
|
|
Joined: Aug 2004
Posts: 7,950 Likes: 19
President of the Imperial Galactic Government
|
|
President of the Imperial Galactic Government
Joined: Aug 2004
Posts: 7,950 Likes: 19 |
If it is DVI, how can it carry audio? DVI does not have audio on its pins, just analogue and digital video.
Meridian owner since 1992
Prime & PSU, Focal Elear headphones, Roon (ROCK 8Gi5 NUC), Explorer 1 & 2, F80. 200/203, various Sonos (via Roon).
|
|
|
|
|
Joined: Mar 2005
Posts: 1,053 Likes: 1
Pan-dimensional being
|
|
Pan-dimensional being
Joined: Mar 2005
Posts: 1,053 Likes: 1 |
There are enough pins to carry audio, it's just not included in the DVI specs since that's not the intention. I don't have one myself, but that's how I understand it.
HD621, G98DH, G68ADV, Bc Acoustiqe ACT A3, 5200C DSP33, NuForce Reference 9 monoblocks, 2x SB3's, Velodyne DD-15 & DD-12 Subwoofers and a Meridian sub.
|
|
|
|
0 members (),
1,073
guests, and
2
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums18
Topics31,247
Posts297,411
Members5,503
| |
Most Online4,788
May 22nd, 2026
|
|
|
|
Google Search
|
Meridian Systems
|
Meridian Streaming
|
Restaurant
|
WiKi
|
Duncan's Meridian Info
|
Board Rules
|
Restaurant Rules
