It's Alive!

And all done within the CLUX chassis.

The install is a little tricky as you have to cut a few traces feeding the outputs to be able to use the existing outputs for the SPDIF outputs. You also need to drill a hole through the PCB itself to be able to connect the SPDIF outputs to the existing output jacks.

DACs are fed in 24bit left justified format. The data fed to the C/Sub DAC needs its channels inverted as they have the LFE on the left channel and Center on the Right channel which is opposite of what the Meridian expects. A jumper on the board will invert the channels to that SPDIF output.

For testing I am using the second output of the Radiance to the input of the CLUX box then from the output of the CLUX back into an input on the Radiance.

Shawn

.