Meridian Unplugged - Powered by MrTechGuy.co.uk Forums Discussion Meridian - Systems Help: External DAC's and Digital Bypass

I've tried manually setting the 568 to 7.1 AAA, in my case 2.0 A as my system is still in pieces and only using main L/R for the moment.

The problem is that soon as I manually type set to 2.0 A, the DVD source switches to multichannel from D2 and therefore get no signal. Also, the speakers are switched to Analogue from Large DSP.

When I connect my DAC to the main L/R digital output, the Lavry will only decipher the output sugnal when the speakers are set to Large/Small DSP. The DAC will not work when the speakers are set to Analogue or 96.24 DSP modes.

Is there a workaround for this?

Another thing, when I play a CD or DVD, the Lavry detect the source at the constant 44.1khz. When I check the Meridian DVD is present in Msconfig, the Lavry picks up signals from 88Khz down to 44.1 depending on whether CD or DVD is in use. Even though I do not have a Meridian DVD, does enabling or disabling the Meridian DVD check box, changes things, processing wise?

Any suggestions would me much appreciated.

Thanks and cheers
Pasadena.