George, heres my setup (from memory so I might come back later for more accuracy)- note actual distances are rounded to nearest 1/2 foot as the M software demands.

Left Front: DSP 8000, 14' 6" actual distance, Positive Phase, -2.5dB, during calibration I found I got a higher SPL on my RS meter making the distance 13'6"....

Center: DSP 7000, 14'6" actual distance, Positive Phase, -2.0dB, during calibration I found I got a higher SPL on my RS meter making the distance 13'6"....

Front Right: DSP 8000, 14' 6" actual distance, Positive Phase, -2.0dB, during calibration I found I got a higher SPL on my RS meter making the distance 13'6"....

Side Right: DSP 7000, 8'0" actual distance, Positive Phase, -4.0dB, cant remember if I changed this during calibration... more later...

Rear Right: DSP 8000, 11'0" actual distance, Positive Phase, 0.0dB, no change to the distance during calibration

Rear Left: DSP 8000, 11'0" actual distance, Positive Phase, -1.0db, no change to the distance during calibration

Side Left: DSP 8000, 7'6" actual distance, Positive Phase, -3.5dB, ant remember if I changed this during calibration... more later...

best regards,
Jerry

Best regards,
Jerry
Main System: 861v6, DSP8000s in corners, DSP7000s Center and Sides, 1-9 humans.