Thanks for the input so far.

1. It seems like the zone two/three volume thing works. I'm going to feed one zone to the kitchen and one zone to another room and want to control volume in them separately. Done smile

2. This worries me a little. It seems like Meridian have locked down quite a number of combinations. Does this mean that I cannot have all speakers “DSP large” and use 2 subs except for LFE? -Any way of fiddling with the SW to unlock those forced choices and get “DSP large” for all speakers and still have two separate subs with the bass from all speakers directed there. To daisy chain two subs in “mono sub” set up is probably quite a challenge for the room correction and it makes it difficult to do adjustments as my subs stands in different places. Open frown

3. Phantom source seems to do the trick. I`ll give it a go when I get the unit. I use a 561 today but the G68 to replace it should be here soon. Done smile

4. Good that I can use the USB connection. Does anyone know if the RS232 still echoes everything that goes on if I use the USB to program the unit? The reason why this is of interest is that I use the display “echo” on the RS232 signal to control my volume controls that sits behind digital XO`s and before the power amps. Open frown

5. I just have to test them. My XO`s should be 24/96 capable. On the SPDIF/AES inputs. Done smile

Best regards

//RoB

RoB