Hi,

I have a few questions regarding the G68 series.

1. Is there a separate volume control for zone 2 and 3. I.e. can I have one listening level for the main outs and a different for a different zone and control them from the remote/front. Or does "the volume control" handle all zones in parallel at the same time. (if not in fixed output position)

2. Can I specify the following? I think Meridian call it Bass Heavy but I cannot find the following configuration described. It seems like several of the sub options in the menu disappears if I use more than one sub.
Fronts = big DSP
Center = big DSP
Rears = big DSP
2 x subs DSP with full bass signal from all speakers, IE not only LFE in all setups

The reason for this setup is that I use external digital XO`s.

3. Is there a way of controlling the video switching that is not a result of the audio input selector? I may want to switch component video without using the home cinema system and only the TV speakers.

4. Can I control and program the unit trough the USB connector or only the RS232?

5. Where can I define the bit-rate and sample rate for the digital outputs and what options are there?


Best regards and thank you

//Robert

RoB