Greetings all. This is my 1st post after having bought a G91 through this site just over a month ago. I'm using the G91 in a 2 channel analogue setup, with the G91's analogue outputs into a Linn amplifier driving Linn speakers.

I'm generally happy with the setup, and it is sonically a huge improvement on the Cyrus Dad3 I've had since my student days. However, a few problems (pops and clicks from the speakers on startup, when changing sources and when navigating menus/chapters on DVDs; intermittent temporary audio failure during extended listening periods) have prevented me from giving a full thumbs-up and beginning to look into DSP speakers as I had originally planned. To date I've used on-screen setup rather than Mconfig, and I'm hoping that the more comprehensive setup options available in Mconfig will solve some of my problems, but as a Mac user I've not been able to sort this out yet. I've followed the recent Mac thread with great interest, and will look into this soon.

A more immediate concern, though, is the problem I've had trying to connect my Xbox 360 to the G91. The video side is working fine, with the 360 linked into the component inputs on the back of G91. The audio has me stumped. I've tried to configure the source with Audio Input set to A1, A2 and A3 analogue inputs, at each of the 4 voltage sensitivity options. The best I've been able to get is highly distorted right channel only audio through A1. A2 and A3 give no sound at all. Am I missing something blindingly obvious here? Any help would be greatly appreciated.

Thanks

DE

MD600-->818-->very insecure DSP3100s