|
|
Joined: May 2000
Posts: 8,364 Likes: 14
President of the Imperial Galactic Government
|
|
President of the Imperial Galactic Government
Joined: May 2000
Posts: 8,364 Likes: 14 |
I assume it's a DSP speaker since you said you turned it off.
I try a few things:
The speaker may be set wrong around the 24/96 settings. Normally upsampled data is sent.
Type your system from front panel.
Then test with a CD in Trifield.
If that works your config is messed up.
Also a bad cable could be the problem. So try connecting the right rear cable to the left rear (at the speaker END).
If this still all points to the speaker it make just not be handling the higher rates.
Also it wouldn't hurt to reload firmware in the speaker. And you should confirm you have the procedure down right by reloading firmware in a speaker that works.
- Fiddler (IMHO)
If you think listening to music is fun, try learning an instrument.
HT: G61RSL, 4x5K, 5.5KHC, 2xSC6000, Transporter, HD621, Philips BDP7501 4K, Tivo, 65" LG OLED 4K C6
Computer: Foobar2000, 5K, Mojo, HiFiMan HE1000 V2
|
|
|
|
|
Joined: May 2000
Posts: 2,314
Senior Shouting Officer
|
|
Senior Shouting Officer
Joined: May 2000
Posts: 2,314 |
Hi George,
Tried all these things and more. Time to bring in the professionals. And bring them in I am.
best regards,
Jerry
Best regards,
Jerry
Main System: 861v6, DSP8000s in corners, DSP7000s Center and Sides, 1-9 humans.
|
|
|
|
|
Joined: May 2000
Posts: 2,314
Senior Shouting Officer
|
|
Senior Shouting Officer
Joined: May 2000
Posts: 2,314 |
Back panel sent to Mother Ship USA today. We'll see what they come up with.
best regards,
Jerry
Best regards,
Jerry
Main System: 861v6, DSP8000s in corners, DSP7000s Center and Sides, 1-9 humans.
|
|
|
|
|
Joined: Mar 2005
Posts: 234
Hitchhiker
|
|
Hitchhiker
Joined: Mar 2005
Posts: 234 |
JerryL,
I had the problem with a pair of MK1 DSP 5000`s; they just started to make this shuffling noise.
I disconnected the inputs and no change, powered them down overnight no change.
I re-flashed the firmware; problem fixed and never had the problem since.
Meridian 800 DVD V4, DSP7200.2's
|
|
|
|
|
Joined: May 2000
Posts: 2,314
Senior Shouting Officer
|
|
Senior Shouting Officer
Joined: May 2000
Posts: 2,314 |
Thank you. I should have tried the firmware reflash but the entire back panel (all the electronics) is now on its way to the Mother Ship.
In the days before the kiddies, I'd have this thing figured out but now, well, I just don't have the same kind of time.
best regards,
Jerry
Best regards,
Jerry
Main System: 861v6, DSP8000s in corners, DSP7000s Center and Sides, 1-9 humans.
|
|
|
|
|
Joined: May 2000
Posts: 2,314
Senior Shouting Officer
|
|
Senior Shouting Officer
Joined: May 2000
Posts: 2,314 |
Well- credit to Meridian USA. My dealer came out on Nov 9 to take out the electronics in the 8000 and they just installed the unit today Nov 21. So thats 12 days. Considering that there are 4 days of weekends in there and that the Nov 9 visit was at night so it did not ship until Nov 10 and that the part got to my dealer yesterday, thats like only 5 or 6 days at the mothership's Atlanta office. Impressive. I believe the problem was diagnosed as the input somehow was blown- must have been all that Pink Floyd!  best regards, Jerry
Best regards,
Jerry
Main System: 861v6, DSP8000s in corners, DSP7000s Center and Sides, 1-9 humans.
|
|
|
|
Forums18
Topics31,249
Posts297,427
Members5,503
| |
Most Online4,788
May 22nd, 2026
|
|
|
|
Google Search
|
Meridian Systems
|
Meridian Streaming
|
Restaurant
|
WiKi
|
Duncan's Meridian Info
|
Board Rules
|
Restaurant Rules
