Meridian Unplugged - Powered by MrTechGuy.co.uk Forums Discussion Meridian - Systems The Quasi-official HH CEDIA 2006 Q&A Session Thread

Originally posted by John Kotches:
Will there be a resolution to and documentation of the full functionality of multi-room capabilities of the G68 processor? This does not properly integrate with a G91 as secondary room controller and primary output at 24/96K

Meridian Response:
G68 v1.3 should have resolved the multi-room functionality issues. If you have not upgraded to this level of firmware, can you kindly upgrade and retry? With respect to the G91 integration for zone 2, copy protection can be another area that's causing difficulties. Unfortunately, this might require an analog output for the functionality you are seeking.

Originally posted by VirusKiller:
Of course, I'm taking a lot of M's answers with a pinch of salt. It wouldn't surprise me to see a reversal of some of these answers. I'm not going to rely on that happening soon though.

G68 Product Firmware Release 1.35 (2006-09-26)

New Features

* Zones. Lots of changes to allow zone source selection and volume control from the G68, allows RS232 based control systems to provide basic functions to multiroom systems. Please contact technical support for details.

Software Fixes - Useful - May be useful to upgrade but not essential

* Zones. Selecting an analogue input for the zones from power-up fixed. Zones have the correct volume from power up and are able to select sources before the main room has been taken out of standby. Fixed unreliable MHR decryption for zone inputs. Video outputs continue to work when main room is in standby.