|
|
|
|
Joined: Apr 2004
Posts: 12,733 Likes: 88
Don't Panic!
|
|
Don't Panic!
Joined: Apr 2004
Posts: 12,733 Likes: 88 |
If you use the Control Window supplied with the latest Meridian config software (instead of Windows Hyperterminal), you receive unambiguous feedback (e.g. an "Entering maintenance mode" message or similar).
Select the "Command" tab. Enter the commands in the bottom left window and hit enter (or press the send button). If your connection is working, you will know.
Good luck!
|
|
|
|
|
Joined: May 2000
Posts: 104
Hitchhiker
|
|
Hitchhiker
Joined: May 2000
Posts: 104 |
From memory, when I first did this I experienced the same thing, having trouble getting Hyperterminal to connect.
I used "regular" control commands (play etc) over Hyperterminal to find a way I knew worked (you'll see immediate results), then put the player in standby to proceed with hte codefree process.
G68, 558, F80.
|
|
|
|
|
Joined: Nov 2005
Posts: 9
Harmless
|
|
Harmless
Joined: Nov 2005
Posts: 9 |
Well, I now have it working and thanks to the many who assisted. It seems that the USB to serial connecting cable was the cause with the receiving side working but unable to send information to the device. Once the new cable was installed, the software worked very simply and easily.
Thanks to all.
Steve
G68, 5 active ATC speakers and 1 active ATC sub.
|
|
|
|
Forums18
Topics31,244
Posts297,384
Members5,503
| |
Most Online4,788
May 22nd, 2026
|
|
|
|
|
|
Google Search
|
Meridian Systems
|
Meridian Streaming
|
Restaurant
|
WiKi
|
Duncan's Meridian Info
|
Board Rules
|
Restaurant Rules
