I have a 210 that I haven’t used in awhile and hooked it back up only to find I can’t get it to check for updates (via the MControl app) or get sound out of it.

I have spoken to Bruce about it and he seems to think I need to send it in for a repair.
The identification states main version 01.00.01 (not sure if that is the firmware version).
Before I do that I wanted to see if anyone has any ideas on what I might try.

Things I have tried:
When I power it up the blue “ Net” light is solid and my MControl app sees it.
The light turns solid white when I play a source ( Roon).
I have it hard wired to my network. When I “ check for updates “ in the MControl app it states “Error- check the internet connection “
I have tried rebooting, unplugging etc.
I tried hooking it up via the MasterSL out to SL in on the 271.
I also tried to go to my 218 SL in.
In MControl Audio setup I have tried SL and network.
I use Roon as a source and I have enabled the 210 and I see the audio bars moving on the Roon display.
I have tried all the different inputs on the remote.
I went into the 271 audio setup on the MControl app and tried SL and network and last valid.

All the above produces no sound.

The unit is not under warranty but I have rarely used it so I am open to suggestions before having to send it in to have it checked.

Thanks in advance.
Joe

My gear: Trinnov CI, 271, 8000.1(SEs), 7200.1 HC (SE), 320s, 3200s, Seaton F18 subs, MS200 (2nd zone), 218, 210.
Other: JVC RS-4100 projector, Lumagen Pro Radiance, Panamorph DCR anamorphic lens, Stewart G4 130 screen, Kaleidescape Strato K, Rvolution 4K player and Zapitti NAS, Oppo BDP-203,Roon Nucleus