|
|
Joined: Sep 2021
Posts: 57
Mostly harmless
|
|
Mostly harmless
Joined: Sep 2021
Posts: 57 |
Good evening,
I have a problem with my 861, HD621 and 598.
By having MMHR active, I get an incoherent sound, I think on 2 channels.
I set the 598 to type 1 then 3, I made all the settings to have 96khz bitstream, I output my 598 via the 3 RCA digital on 861 in MD1.
I have the same problem on my DENON DVD A1 UD HDMI player on by HDMI then HD621 then 861 in MD2.
Could it be my 861 digital input card that needs to be configured?
Could someone help me?
Sincerely
Leca Bernard
|
|
|
|
|
Joined: Jan 2013
Posts: 81 Likes: 7
Mostly harmless
|
|
Mostly harmless
Joined: Jan 2013
Posts: 81 Likes: 7 |
Yes it can be that they were used as normal single digital inputs which means they need to be configured for MD1 and MD2.
It can also be that the wrong output is connected to the input on the 861, with that I mean for example the centre and sub channel to the connection of the fronts.
861v4/ID40, G98, UHD722, Mark and Levinson No. 29, 2 * Linn LK85, Linn LP12, Musical Fidelity X-LPS v3, Empire Vandenhul MC1000, NVidia shield, PS4, Thiel CS2.4, Thiel 1.6 rear, Audio physic Celcius centre, Rel Quake Sub
|
|
|
|
|
Joined: Sep 2021
Posts: 57
Mostly harmless
|
|
Mostly harmless
Joined: Sep 2021
Posts: 57 |
Thank you for your answer, on Meridian config I enter MD1 and MD2, but it also appears D1 to D6, how do we configure the card only in MD1 and MD2?
Sincerely
Leca Bernard
|
|
|
|
|
Joined: Sep 2021
Posts: 57
Mostly harmless
|
|
Mostly harmless
Joined: Sep 2021
Posts: 57 |
Good morning,
I would also like to know if I exit the 598 via the 3 RCA, in the setup, should I select MHR or not?
Thank you for your response.
Sincerely
Leca Bernard
|
|
|
|
|
Joined: Jan 2013
Posts: 81 Likes: 7
Mostly harmless
|
|
Mostly harmless
Joined: Jan 2013
Posts: 81 Likes: 7 |
I think you just need to select MD1 as your connection in the Meridian config tool when you set up the connection from the 598 to the 861.
861v4/ID40, G98, UHD722, Mark and Levinson No. 29, 2 * Linn LK85, Linn LP12, Musical Fidelity X-LPS v3, Empire Vandenhul MC1000, NVidia shield, PS4, Thiel CS2.4, Thiel 1.6 rear, Audio physic Celcius centre, Rel Quake Sub
|
|
|
|
|
Joined: Apr 2012
Posts: 3,177 Likes: 171
Hooloovoo
|
|
Hooloovoo
Joined: Apr 2012
Posts: 3,177 Likes: 171 |
I would also like to know if I exit the 598 via the 3 rca, in the setup, should I select MHR or not? Yes, use MHR.
HC: 861v4/ID40/LPS, DSP5000, DSP5000VC, DSP3100, SW1600, HD621, Oppo BDP-105, Sony VPL-HW55ES
2-Channel: Oppo BDP-105, TEAC VRDS-7/Trichord Clock 3/PSU, 551, Quad 303, Harbeth Compact 7ES-3, Kimber cables, Russ Andrews mains and supports.
Previous Meridian: 5000C, 5200SL, 7200.2, 6000, 562V.2, 568.2mm, 800v4, 808.2i, 818v2/v3, 861v8, 502
|
|
|
|
|
Joined: Sep 2021
Posts: 57
Mostly harmless
|
|
Mostly harmless
Joined: Sep 2021
Posts: 57 |
Good morning
To have the multi-channel MHR output, must it be output in bistream or lpcm?
Leca Bernard
|
|
|
|
|
Joined: Mar 2016
Posts: 132 Likes: 31
Hitchhiker
|
|
Hitchhiker
Joined: Mar 2016
Posts: 132 Likes: 31 |
LPCM. Bitstream will send DD undecoded on channel 1/2.
Lounge: G61RSL, DSP3200, DSP3300, DSW, HD621+Vertex2, SBT, Kef Ci160.
Office: DSP33, D1500, SBT
Archive: 568.2m, 562v3, 562v, DSP3100
|
|
|
|
|
Joined: Sep 2021
Posts: 57
Mostly harmless
|
|
Mostly harmless
Joined: Sep 2021
Posts: 57 |
The 598 manual specifies that you must put in the bitstream MHR outputs connected to a 568 or 861 to have multichannel.
I don't understand this.
Sincerely
Leca Bernard
|
|
|
|
|
Joined: Jul 2019
Posts: 441 Likes: 36
Paranoid android
|
|
Paranoid android
Joined: Jul 2019
Posts: 441 Likes: 36 |
I would advice LPCM and MHR turned on.
#1 568.2mm, HD621, G91DH, 513, 511, DSP3100 , DSP33C , DSP33, 2x MJ Pro 50 MKI, M1500
#2 G68J, HD621, DSP3100, DSP5200HC, DSP33, 3x MJ Pro 50 MKII, MS200, SB Touch, Vertex 2
#3 G61rsl, HD621, 596P, DSP7000, DSP5500HC, DSP33, 2x MJ Pro 50 MKII, M1500
Applied mods: NOS-SRx Filter by Mr. Apodizer
Mr. Apodizer Digi box
|
|
|
|
|
Joined: Jan 2013
Posts: 81 Likes: 7
Mostly harmless
|
|
Mostly harmless
Joined: Jan 2013
Posts: 81 Likes: 7 |
The 598 manual specifies that you must put in the bitstream MHR outputs connected to a 568 or 861 to have multichannel.
I don't understand this. I cannot find that in the manual on this side so maybe use that.
861v4/ID40, G98, UHD722, Mark and Levinson No. 29, 2 * Linn LK85, Linn LP12, Musical Fidelity X-LPS v3, Empire Vandenhul MC1000, NVidia shield, PS4, Thiel CS2.4, Thiel 1.6 rear, Audio physic Celcius centre, Rel Quake Sub
|
|
|
|
|
Joined: Jan 2019
Posts: 111 Likes: 6
Hitchhiker
|
|
Hitchhiker
Joined: Jan 2019
Posts: 111 Likes: 6 |
i have such a problem - no sound from central channel from time to time.
i think there is some problem with lpcm output from ATV4K or HDMI handshaking with HD621.
after some manipulation all is ok, but after HDMI cables reconnection the problem comes back.
i have no algoritm to fix this bug. sometimes changing MD1 to MD2 helps, sometimes HDMI extractor on/off helps.
HD621 , 800v4, 861v4, DSP7000, DSP5200HC
|
|
|
|
2 members (MI', Locus),
390
guests, and
3
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums18
Topics31,247
Posts297,426
Members5,503
| |
Most Online4,788
May 22nd, 2026
|
|
|
|
Google Search
|
Meridian Systems
|
Meridian Streaming
|
Restaurant
|
WiKi
|
Duncan's Meridian Info
|
Board Rules
|
Restaurant Rules
