Bruce, I set the G98 to type 5. Multichannel selected for Aux. Turned off MHR. No multichannel 5.1 LPCM output received via aux out to Trinnov 16 digital input. Output meters on Trinnov only receiving PCM 2ch.
It appears either the Trinnov cannot support 5.1 LPCM signals or the G98 does not support 5.1 LPCM VIA Aux output.


The below was copied from the G98 setup mannul.

Select this option For this application
Preamp – An Out (Type 0) To use the DVD player as a preamplifier, connected via the analogue outputs to a power amplifier or
analogue active speakers. All the other Application options provide fixed analogue outputs.
Preamp – Aux Out To use the DVD player as a preamplifier, connected via the AUX DIGITAL output to a pair of DSP
loudspeakers or a digital surround controller.

Preamp – Dig Out (Type 1) To use the DVD player as a preamplifier, connected via the L/R MAIN DIGITAL output to a pair of DSP
loudspeakers or a digital surround controller.

Transport (Type 3/4/5) To connect the DVD player to the multichannel inputs of a Meridian digital surround controller via the L/R,
C/LFE, and SURR MAIN DIGITAL outputs.

Surround (Type 6) To connect the DVD player LR, C/LFE, and SURR MAIN DIGITAL outputs directly to DSP loudspeakers.

Trinnov Altitude 16, 271, DSP7200SE front L/R, DSP7200SE HC center, 556 amp for rear surrounds, Magnetar UDP800 universal disc player, REL Acoustics Subwoofer Carbon Special, ROON Nucleus One,
Direct TV satellite box, Xbox One S, Nintendo Switch, Sony XR 77A80J OLED