Hi

I suggest that the reason that you have different volumes on the master and the processor is that you need to designate which unit is the controller. If the 5200 Master is in sight of the remote when listening, I suggest you make it the controller. You will then need to set the 568 as non-controller. Easy way to check is to put the sytem into standby and then press Clear on the remote; each unit will then show whether it is Con or Non Con, if you have 2 units showing Con, then you need to rectify.

Hope this makes sense.
Kind regards, Jon

Owner since 1996 - 501, 506 and M60.2 Rosewood - Thanks Gerry