|
|
Joined: Mar 2010
Posts: 22 Likes: 1
Harmless
|
|
Harmless
Joined: Mar 2010
Posts: 22 Likes: 1 |
Is this something I can replace myself or do I need to have it serviced. Live in Norway, don't know if we have any support for Meridian equipment.
|NUC| Argon Solo as Roon Endpoint| Meridian 568.2MM| Nelson Pass DIY amps| Klipsch Heresy - assisted by DSP33 center in Trifield | It but a smile on my face!
|
|
|
|
|
Joined: Apr 2012
Posts: 3,174 Likes: 168
Hooloovoo
|
|
Hooloovoo
Joined: Apr 2012
Posts: 3,174 Likes: 168 |
Is this an error message you’re getting on the 568’s screen? Might just need the firmware re-flashing.
HC: 861v4/ID40/LPS, DSP5000, DSP5000VC, DSP3100, SW1600, HD621, Oppo BDP-105, Sony VPL-HW55ES 2-Channel: TEAC VRDS-7/Trichord Clock 3/PSU, Avondale S100, Harbeth Compact 7ES-3 Previous Meridian: 5000C, 5200, 7200.2, 6000, 562V.2, 568.2mm, 800v4, 808.2i, 818v2/v3, 861v8, 551, 502
|
|
|
|
|
Joined: Apr 2012
Posts: 3,174 Likes: 168
Hooloovoo
|
|
Hooloovoo
Joined: Apr 2012
Posts: 3,174 Likes: 168 |
Maybe start with some of the troubleshooting steps here. It’ll be roughly similar for a 568.2, but you’ll have to use the legacy config program and the latest version of the firmware if you have to re-flash it. If you haven’t done it before, let us know as there are a few bits of advice, specific cables and adapters, and procedures to follow (and also you might have to ask a dealer here nicely for the firmware).
HC: 861v4/ID40/LPS, DSP5000, DSP5000VC, DSP3100, SW1600, HD621, Oppo BDP-105, Sony VPL-HW55ES 2-Channel: TEAC VRDS-7/Trichord Clock 3/PSU, Avondale S100, Harbeth Compact 7ES-3 Previous Meridian: 5000C, 5200, 7200.2, 6000, 562V.2, 568.2mm, 800v4, 808.2i, 818v2/v3, 861v8, 551, 502
|
|
|
|
|
Joined: Mar 2010
Posts: 22 Likes: 1
Harmless
|
|
Harmless
Joined: Mar 2010
Posts: 22 Likes: 1 |
Is this an error message you’re getting on the 568’s screen? Might just need the firmware re-flashing. Yes, it is an error message in the screen: Bad Eeprom. Would be grateful if I could get some tips on how to re-flash the unit.
|NUC| Argon Solo as Roon Endpoint| Meridian 568.2MM| Nelson Pass DIY amps| Klipsch Heresy - assisted by DSP33 center in Trifield | It but a smile on my face!
|
|
|
|
|
Joined: Apr 2012
Posts: 3,174 Likes: 168
Hooloovoo
|
|
Hooloovoo
Joined: Apr 2012
Posts: 3,174 Likes: 168 |
- Do you have DSP or analogue speakers, if so, how many and what sources? Before re-flashing, try re-typing the unit to the closest match to your system, if that clears the fault, you can try re-typing again, back to your currently stored type. Instructions for re-typing on p. 63 of the 568 User Guide- If the above doesn’t work, make sure you have the correct USB-Serial converter Wiki. - You will need a copy of the legacy config program here. Then you’ll need a copy of the flash upload instructions, which hopefully a friendly Hitchhiker or dealer might be able to supply if you ask. I don’t have those to hand at the moment.
HC: 861v4/ID40/LPS, DSP5000, DSP5000VC, DSP3100, SW1600, HD621, Oppo BDP-105, Sony VPL-HW55ES 2-Channel: TEAC VRDS-7/Trichord Clock 3/PSU, Avondale S100, Harbeth Compact 7ES-3 Previous Meridian: 5000C, 5200, 7200.2, 6000, 562V.2, 568.2mm, 800v4, 808.2i, 818v2/v3, 861v8, 551, 502
|
|
1 member likes this:
Baard |
|
|
|
|
Joined: Mar 2010
Posts: 22 Likes: 1
Harmless
|
|
Harmless
Joined: Mar 2010
Posts: 22 Likes: 1 |
Thanks for the help - this was valuable information.
|NUC| Argon Solo as Roon Endpoint| Meridian 568.2MM| Nelson Pass DIY amps| Klipsch Heresy - assisted by DSP33 center in Trifield | It but a smile on my face!
|
|
|
|
|
Joined: Apr 2012
Posts: 3,174 Likes: 168
Hooloovoo
|
|
Hooloovoo
Joined: Apr 2012
Posts: 3,174 Likes: 168 |
No worries, if you need anything else just ask.
HC: 861v4/ID40/LPS, DSP5000, DSP5000VC, DSP3100, SW1600, HD621, Oppo BDP-105, Sony VPL-HW55ES 2-Channel: TEAC VRDS-7/Trichord Clock 3/PSU, Avondale S100, Harbeth Compact 7ES-3 Previous Meridian: 5000C, 5200, 7200.2, 6000, 562V.2, 568.2mm, 800v4, 808.2i, 818v2/v3, 861v8, 551, 502
|
|
|
|
|
Joined: Mar 2004
Posts: 369 Likes: 34
Hitchhiker
|
|
Hitchhiker
Joined: Mar 2004
Posts: 369 Likes: 34 |
I can support Meridian in Norway (Oslo). Send me an PM
TV room: 861v8, UHD722,Front 2xDSP7200SE, DSP7200HCSE, Side DSP5200, Rear DSP33, DSW, Velodyne DD 15 Sub, Roon Rock NUC, QNAP NAS, Chromecast Ultra, Apple TV, Cambridge Audio 752BD, Pro-ject Pre box S2 digital, Philips Pronto remotes, Supra LoRad Power. Office: 800v3, MS200, DSP3100 Basement: MS600, 502, 557, Dynaudio 52se, Dynaudio Sub 250
|
|
|
|
|
Joined: Mar 2010
Posts: 22 Likes: 1
Harmless
|
|
Harmless
Joined: Mar 2010
Posts: 22 Likes: 1 |
No worries, if you need anything else just ask. Success! Firmware re-flashing and re-typing, page 69 from the manual, fixed the "Bad EEPROM" problem. Thanks to you and help from older posts on the forum.
|NUC| Argon Solo as Roon Endpoint| Meridian 568.2MM| Nelson Pass DIY amps| Klipsch Heresy - assisted by DSP33 center in Trifield | It but a smile on my face!
|
|
1 member likes this:
3dit0r |
|
|
|
|
Joined: Mar 2010
Posts: 22 Likes: 1
Harmless
|
|
Harmless
Joined: Mar 2010
Posts: 22 Likes: 1 |
I can support Meridian in Norway (Oslo). Send me an PM Thanks! I will contact you, but then for a few other things.
|NUC| Argon Solo as Roon Endpoint| Meridian 568.2MM| Nelson Pass DIY amps| Klipsch Heresy - assisted by DSP33 center in Trifield | It but a smile on my face!
|
|
|
|
|
Joined: Apr 2012
Posts: 3,174 Likes: 168
Hooloovoo
|
|
Hooloovoo
Joined: Apr 2012
Posts: 3,174 Likes: 168 |
No worries, if you need anything else just ask. Success! Firmware re-flashing and re-typing, page 69 from the manual, fixed the "Bad EEPROM" problem. Thanks to you and help from older posts on the forum. Cool, well done!
HC: 861v4/ID40/LPS, DSP5000, DSP5000VC, DSP3100, SW1600, HD621, Oppo BDP-105, Sony VPL-HW55ES 2-Channel: TEAC VRDS-7/Trichord Clock 3/PSU, Avondale S100, Harbeth Compact 7ES-3 Previous Meridian: 5000C, 5200, 7200.2, 6000, 562V.2, 568.2mm, 800v4, 808.2i, 818v2/v3, 861v8, 551, 502
|
|
|
|
3 members (Maz, Dappad, Stebbo),
76
guests, and
3
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums18
Topics31,150
Posts296,941
Members5,503
| |
Most Online4,788 May 22nd, 2026
|
|
|
|