Make sure you type each speaker - Type 6 normally works the best.

Remember, only one speaker should be the Master (red light on) - use the PLAY button on the remote to toggle master/slave setting
Ensure one speaker is Left and the other is Right - use the arrow keys to select.

Connect everything up, make sure everything is in standby and press CLEAR on the remote.

The 562 should then be the controller.

Hopefully, that should allow things to operate properly.

Then you need to read the manual on the 562 and set that up how you want it.

Make notes as you go, so if you ever need to reset things, you can quickly set things up again.

With regards to firmware, the DSP6000s are 24/96 and v5.4 is the latest.
The 562 v1.9 is on an EPROM, so cannot be easily updated.

The DSP6000s are excellent speakers!

Good luck.

Cheers,

Steve

Last edited by swpnt; 2024-05-14 22:51.
Main: 861v6 (LPS), 808v6, UHD722, DSP8000SE Anniversaries, DSP5200.2HC, DSP7200.2, SW1600, Sky Q, Cambridge Audio BD, Roon, M80
Office: 861v4 (LPS), 818v3, 800v4, HD621, M&K S150P, DSP5500HC, M&K MPS2810 sub x2
Son's system: 861v4, HD621, DSP6000.2, DSP5200HC, DSP33
Spare: MCD, 100 Series, 200 Series, 500 Series, F80s, C15s.