That means what exactly? If I use Room Correction is distance and phase and correction included or does it use the distance/phase procedure as a reference? The SPL works in conjunction with Room Correction but the ECM 8000 from Behringer with phantom power supply does not, always not enough signal.

I have now measured only surround, then subwoofer and then all 8 channels. A total of 3 manual and 1 automatic measurement. In the automatic measurement, the progress has now been at 81% for 10 minutes, I don't think anything is happening.

568.2 & 861v4 LPS etc., Neumann DSP 7.2