Meridian Unplugged - Powered by MrTechGuy.co.uk Forums Discussion Meridian - Systems Possible to use SpeakerLink and Coax Inputs?

Hey Rick, did some testing tonight and got some interesting results:

Option #1:
Run SpeakerLink comms Out of the slave DSP8000 to the SpeakerLink Comms input of the DSP7200HC
Disconnect the current Din comms to the DSP7200 from the 861

Results: Speaker turns on and volume control works, but name on display did not update (ultimate goal)


Option #2:
Type the DSP7200HC to be RJ45 input.
Then Configure it to use its D2 input for the Sources you use, so it uses its coaxial digital input instead of SpeakerLink audio input.

Results: Have to change speaker to MASTER to be able to change input sources. Did that, power cycled, and then changed back to SLAVE. Name updated on display and sound worked on source #1 (WMC), but no sound on source #2 (Apple TV).

So close... I'll do some more experimenting this weekend...