Hi, Steve.

Thanks for all the informations provided.

The cable seems to be connecting the RS2323 with the front panel, I don't know why.

Is that a why to check the value of a resistor and capacitors without removing it from the board? I have a fairly decent multimeter that I can use to read some values.

CapXon is the blue capacitor, usually it is used in cheap products, not sure if it is original.

About the past history, I unfortunately don't have this information, I bought the system AS IS and my main interest was the pair of DSP7000. Luckily they are working, all amps are working but some of the 8" woofer shows signs of wear due to storage in a humid place and so I send it to someone that can fix it, they are flexing abnormally and lost the connections to the voice coil due to the paper degrading with humidity.

Do you know if the APODISING FILTER is applied to the Zone 2/3 digital outputs? It is not ideal, but in a last case scenario I can use the G68D with the DSP7000 as is for a while, at the time I just want to use it as a 2.0 system in a living room. I already have a good home theater system with everything new running with Arcam, Lexicon and Revel speakers.

All the best,
Jorge