Wow, pictures and everything. Thanks much.

Begs the question, did I set the 568 improperly without the visual representation of the new software. It seems that setting L/R to large means there can be no sub augmentation of the lowest registers. I had an Arcam prior and thought that I could do this but thinking it through now, I'm wondering if my memory is faulty.

I always thought there should be two crossover points because only the highest end systems have an identical center channel. Even very good systems have space compromises on the center channel making them sound different and often bass deficient. Two crossover points would allow setting L/R large, center small. You could send for example center channel info below 40k to the L/R, and send anything below 20 from the L/R to the sub in addition to LFE. I don't know if there is a brand out there that does this. The 861 has a second crossover labelled LFE, I'm not sure why you'd want to change that as LFE by definition is a sub channel.

Last question, you mentioned the "ID40 card for Sooloos or Roon". I was under the impression you need the ID41 card for Roon, am I wrong?

Thank you much.

IP City: