Meridian Unplugged - Powered by MrTechGuy.co.uk Forums Discussion Meridian - Systems SpeakerLink used as Digital Out (XLR or SPDIF) plus COMMS and RS232

If I use a LL1574, to match the impedances across the 2 networks, do I need to worry about voltages?

I will be coming out of the G65 using a SpeakerLink output (AES) and connecting to a DSP5200C (SPDIF). Are the voltages the same across both these?

Or, will I need to use resistors as a voltage divider to lower the voltage on one side?

Hi!

The images with the schematics aren't loading. They must have been lost over time. Does anyone have them saved to their computer? Please share.

I'm trying to connect a G68 with a SpeakerLink and a DSP3100 with a SPDIF. I have a Neutrik adapter, and connecting it is straightforward.
However, I'm having trouble with the M5C5 pinout. As far as I can tell, the DSP3100 connector has different pins than those shown in this image.

This image is from Google; the original has disappeared...

https://www.dropbox.com/scl/fi/ulqc...lg5i2jloqgfc4fu&st=twjtkbyi&dl=0

Thanks for your help.