Hi Mark,

You should be able to press the display button on the remote, which should cycle through the various displays on the units. One of them on the DSPs should be the sample rate that the speakers are receiving...

The diagnostic displays can be enabled on the G-Series within the configuration program, or from the front panel.

The timings are subtle, we're probably talking 1-3ms (can't remember what the updated firmware notes mentioned for the 24/96 versions) - Try running the system in Trifield and judge from that if anything needs adjustment and if the sound is a bit phased or slurry, then you may need to tweak the timings...

Good luck,

Cheers,

Steve

Main: 861v6 (LPS), 808v6, UHD722, DSP8000SE Anniversaries, DSP5200HC, DSP7200.2, SW1600, Sky Q, Cambridge Audio BD, Roon, M80
Office: 861v4 (LPS), 818v3, 800v4, HD621, M&K S150P, DSP5500HC, M&K MPS2810 sub x2
Son's system: 861v4, HD621, DSP6000.2, DSP5k.2C, DSP33, F80
Spare: MCD, 100 Series, 200 Series, 500 Series, C15s.