|
|
Joined: Sep 2012
Posts: 57 Likes: 9
Mostly harmless
|
|
Mostly harmless
Joined: Sep 2012
Posts: 57 Likes: 9 |
There is often debate on the merits of wired or wireless signal transmission and, as is often the case, arguments run the gamut. I thought I'd share a validated user experience (mine) that though anecdotal, may be instructive for some (and old hat to others).
I've been running a two-channel digital audio system in my living for six years. I started with Sooloos and switched entirely to Roon late last year. The current setup is as follows:
INTERNET Comcast Cable >>> Arris SB6190 Modem >>> Linksys MX5 Velop AX WiFi 6 (set as the router) >>> Linksys LGS116P 16 Port Switch (There are two other Linksys MX5s set as nodes, one in my upstairs office, and one in the basement).
LIVING ROOM AUDIO 818v3, DSP7200.2, Roon Nucleus+, Tidal Subscription, UHD722, iTach TCP/IP to Serial (IP2SL-P), Sony Bravia/Android 4K TV, Intel NUC i7 PC/Win10Pro 64 bit, iPad Air2 (3rd gen), QNAP TS-453A (relegated to backup and regular NAS duties), PS Audio Power Plant 10. ALL WIRED with CAT6 to the 16 Port switch (along with other household detritus).
After acquiring the Roon Nuleus+, I've had reliable wireless support for multiple endpoints (up to 8) around the house, on the deck, often concurrently with two people working on PCs, and concurrent movie streaming at the nodes.
BASEMENT AUDIO (and my WiFi revelation) I've taken delivery of a 218 and an AC12 so that I can take my 1st Gen G92 (just for Trifield), DSP5200s and a DSP3100HC out of mothballs, and have Roon (and everything else internet) in the basement. The Sony 1080P TV was already plugged into the Linksys MX5 Node down there and streamed reliably. I was concerned that I might have to run CAT6 from the living room router to the Basement Node, which would have been a royal pain and a severe bone of contention with HER. The great news is that with my configuration, wireless via Linksys MX5s, the network has proven fast and reliable for several months. The 218 renders Roon without clicks or other digital detritus and is instantly responsive to instructions from various control devices. I tried it in the basement, and in my office upstairs, with an old Grace M901 headphone amp attached to it.
Wireless between endpoints in a multi-room/zone setups has been very iffy in the past. I've tried it with Routers and range extenders with lots of frustration, especially with music zones. I tried the first generation Linksys Velop Mesh, but I think the approach was yet to be "sorted." But WiFi appears to have taken a significant leap with the advent of the latest mesh networks. I'm not advertising Linksys's iteration of Mesh, just pointing out that in my setup, it does what it says on the tin. Each MX5 is a lot more expensive than their first-gen Velop Mesh system, but I weighed that against the cost of opening up the walls, and their price suddenly paled.
Please accept my apologies if this is all old hat and your time wasted.
Richard Main: 818v3, DSP7200.2x2, Prime Headphone Amp & Power Supply, Roon Nucleus+ w/Lifetime Sub., Tidal Subscription, UHD722, IP2SL-P (TCP/IP to Serial), Sony Bravia 4K TV, Intel NUC13ANHi7 Pro PC/ Win11Pro/64, iPad Air (5th gen), LinkSys MX8500 Mesh Router (X 4), LinkSys LGS116P 16 Port Switch, PS Audio Power Plant 10. Basement: 218, DSP5200x2
|
|
|
|
1 members (swpnt),
601
guests, and
1
robot. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums18
Topics31,206
Posts297,207
Members5,503
| |
Most Online4,788 May 22nd, 2026
|
|
|
|