In the Wiki there is no mention of doing it with no processor. Can it be done? How?
Thanks!
218, AC12, DSP6000 24/96LR, 4K AppleTV, Sony blu-ray player (BDP S570) and QNAP TS-251 and a Mac Book Pro (mid 2012), an Intel Nuc8ieBEH Technics SP10MK2 with Technics EPA100MK2 tone arm and PS Audio Phonolink Preamplfier
It is done using a PC and the Meridian Flash Upload program (WinFup) and an appropriate serial cable. If you are using a laptop that does not have a true DB-9 serial port you will need a USB to DB-9 serial adapter such as the Tripplite or IO Gear GUC-232A
www.cmbintegrations.com One step from the Presidency #1 Trinnov Altitude 32-8-16, 271, 8000XE, 7200SEHC, 7200.2, Seaton F18, JL Fathom F113, Revel w990's, Kef R7, ATI 528 Amp, JVC RS4100K, SI screen. Roon Nucleus+, Eno AG, Eno M link, 218. #2 Mark Levinson No5105, Ayre VX8 and CX8, Vandersteen Treo CT, Preamp varies. #3 Meridian Ellipse
Firmware is never uploaded using a processor ... you have to use a Windows PC and Meridian's WinFUP (Flash Upload Program). What device(s) are you looking to update?
218, AC12, DSP6000 24/96LR, 4K AppleTV, Sony blu-ray player (BDP S570) and QNAP TS-251 and a Mac Book Pro (mid 2012), an Intel Nuc8ieBEH Technics SP10MK2 with Technics EPA100MK2 tone arm and PS Audio Phonolink Preamplfier
Ruben and I have correspondended about the firmware, can anyone confirm if the 4.003 version he currently has loaded in the 6ks can be flash updated, or was that the last EEPROM version? The firmware notes don't go that far back.
Can't confirm on D6k's, but on D5k's, pretty sure v4.x was the last EEPROM version, everything after that was flash upgradable - presumably that was the 18bit to 96/24 transition..
Meridian owner since 1992 Prime & PSU, Focal Elear headphones, Roon (ROCK 8Gi5 NUC), Explorer 1 & 2, F80. 200/203, various Sonos (via Roon).
What are the cabinet and electronics serial numbers?
www.cmbintegrations.com One step from the Presidency #1 Trinnov Altitude 32-8-16, 271, 8000XE, 7200SEHC, 7200.2, Seaton F18, JL Fathom F113, Revel w990's, Kef R7, ATI 528 Amp, JVC RS4100K, SI screen. Roon Nucleus+, Eno AG, Eno M link, 218. #2 Mark Levinson No5105, Ayre VX8 and CX8, Vandersteen Treo CT, Preamp varies. #3 Meridian Ellipse
The cabinet numbers are: 200275 and 200726. They were upgraded to 24/96 on 8/26/99. Both have the 24/96 seal. Firmware is 4.003. Where are the electronics numbers?
218, AC12, DSP6000 24/96LR, 4K AppleTV, Sony blu-ray player (BDP S570) and QNAP TS-251 and a Mac Book Pro (mid 2012), an Intel Nuc8ieBEH Technics SP10MK2 with Technics EPA100MK2 tone arm and PS Audio Phonolink Preamplfier
Upgraded speakers generally have different cabinet serial numbers and back panel serial numbers. But it looks like from your description that yours are indeed 24/96 versions.
www.cmbintegrations.com One step from the Presidency #1 Trinnov Altitude 32-8-16, 271, 8000XE, 7200SEHC, 7200.2, Seaton F18, JL Fathom F113, Revel w990's, Kef R7, ATI 528 Amp, JVC RS4100K, SI screen. Roon Nucleus+, Eno AG, Eno M link, 218. #2 Mark Levinson No5105, Ayre VX8 and CX8, Vandersteen Treo CT, Preamp varies. #3 Meridian Ellipse
Can't confirm on D6k's, but on D5k's, pretty sure v4.x was the last EEPROM version, everything after that was flash upgradable - presumably that was the 18bit to 96/24 transition..
Thanks Ian, I had a sneaking suspicion that was the case and had mentioned to Ruben that the older 5ks and 6ks had the same firmware numbering.
I wonder if the Saints of MrTechGuy, Tarik, Longitude0 or Swpnt could confirm? And if I've missed any other recapping experts out, my apologies!
Cheers George
PS, Who was it that was offering EEPROM re-programming fairly recently?
Generally, if the speakers are 24/96 they can be flash firmware upgraded. Only the 18bit models required EPROM chips.
I've had a number of DSP5k's with v4 firmware and have successfully upgraded them to 5.xx
If they've not been re-capped, there is definite mileage in doing them - as many others will vouch - it is THE most cost-effective upgrade you can make to your DSP's!