Been reading about the HDfury Vertex2 and see Amazon.com sell it for 399USD + can deliver to Norway for the same price as the one I mentioned earlier.
HDfury Vertex2 It is a new version of the famed HDFury Vertex with the following features (brief overview - not all encompassing):
1. 4×2 Matrix/Splitter/Scaler for 4K HDR/DV 18Gbps/600MHz + Full HDMI Audio out (extract HDMI/ARC/eARC).
o 4x HDMI 2.0 inputs
o 2x HDMI 2.0 video outputs (w/ scaling options) AND
o 1x dedicated HDMI full audio output (user selectable 720p or 1080p)
2. All inputs capable of 4K HDR/HLG/DV/LLDV/HDR10+ up to 18Gbps
3. Vertex² is also capable of extracting full audio from any TV ARC or eARC (HDMI2.1) up to Atmos High Bit Rate over True HD and forward it via 720p/1080p HDMI to ANY capable AVR input
4. Process two 18Gbps signals at the same time from 2 sources to 2 sinks devices and have one of the channel duplicated and converted in res/hdcp/chroma/color depth/color space/etc. to 1080p + a third output with HDMI audio out
5. HDMI TX0 and TX1 video outputs are capable of outputting 18Gbps as well as all sound formats
6. Greater memory that original Vertex
7. Auto-switch any source
8. Unlike the original Vertex, you can setup and manage the Vertex² via a webserver from any computer/mobile or web browser based device
9. LAN Control, RS232, L/R stereo or Optical 5.1 output, IR RX, IR sensor, IR window, OLED display and 4 buttons on the side allowing to enter/exit and perform change in the device system menu
10. Exact signal timing report with up to 3 digits decimals accuracy on frame rate
11. Vertex² is now capable of sending any custom RS232 commands to any RS232 capable display based on incoming signal types or particular metadata value
12. Provides a total of 15 HDCP 1.4 and 2.2 engines for decryption/encryption
13. Capable of connecting any HDCP1.x or HDCP2.x source devices to any HDCP1.x or HDCP 2.x sink devices
14. Display HDCP 2.2 Content with Non-HDCP2.2 Compliant Devices
15. Vertex2 is capable of physically disconnecting/reconnecting device at output via software, designed to save all standby mode issues some/most Android TVs have (e.g like Sony)
One dedicated HDMI port for audio output is like music in my ears.
Basically, I can use this as my new HDMI switch and HD621 for audio transport only.
When it comes to Apple TV and it's 4k content, picture wise it's pretty good, but when I put in a 4k Bluray disc, no streaming can beat it.
My friend still using the Oppo BDP-93, but guess after an 4k movie after borrowing my Pioneer UDP-LX500, guess he will get one pretty soon.