Hello again to you all
I just uploaded my G68AXV after having problem with it at first. The G68ADV issue and no saving of setup.

This is how it worked.

1. I renamed the original folder where I have all past Meridian downloads, from Meridian to oldmeridian in my fav directory. I do not trust DL's or uninstalls to leave directories that have like names alone.

2. Then I uninstalled the current Meridian SW.

3. Then Installed the new Meridian SW directly from the web site. I selected only the items & manuals I needed. Meridian has all items selected so watch out, that would take forever to DL and or install. I did not save to a folder, cause of the earler problems.

4. When the install completed I went to Start/programs/Meridian/flash upload program.

5. I clicked the browse button and it took me right to the directory to pick 500 or G Series directory. I picked G Series/G68/ and then click on G68.MFP and made sure the correct com port was selected then clicked start.
Just cause you download and install the program in the computer does not mean your done, you still have to install the upgrade to the unit to complete the update.

6. After the download was complete I started the wizard from the unit directly and picked reset all. When the types option started I pressed the up buttom till my saved settings showed up which was still there, that was a sirprise. It showed up after the types choices. Then I checked to see if my setting were there and they were, so I put the unit in standby via the front on/off button. Pressed display button to verify version 1.3.
7. Started the configure program on the computer as usual and it asked if I wanted it to fetch the G68AXV connected to com1 and not the ADV as it had before and I clicked yes and as they say, the rest is history. All my setting for all items including Radio stations were there. I have yet to do a room correction so I do not know if that is save as well. I had problems with setting up two REL subs with the old software.

Hope this helps some people because it was confusing to me at first.

hevac1

[This message has been edited by hevac1 (edited 04-29-2005).]

Norton
G68AXV