... I bought some replacement tweeters. ... But, question is, how to fit them? I sat down just now, unscrewed the originals carefully, and tried to prise them out and... they just didn't budge.
With some feminine ingenuity/advice/input from my better half, I have manufactured an extraction tool (patent pending). Take Bobbie hair pin, unfold, snip off bulbous end with wire cutter section of needle nose pliers, bend just the tip to 90 degrees, insert in screw hole, catch the back of faceplate, and pull loose. Just be careful that as it breaks free from gasket it doesn’t t fall out and swing into your mid woof.
I was surprised to find my DSP 5K to be H715’s (25 TAFD/GW-BS) made 06/97. Was thinking I’d try ferrofluid refurbishment at my local speaker repair place (only $50/pair) first, but considering that I’m also considering 24/96 board upgrade and those would definitely not be EQ’d for H715’s, not so sure...
Google Search
|
Meridian Systems
|
Meridian Streaming
|
Restaurant
|
WiKi
|
Duncan's Meridian Info
|
Board Rules
|
Restaurant Rules
