Meridian Unplugged - Powered by MrTechGuy.co.uk Forums Discussion Meridian - Streaming Can't get MC200 to drive my DSP5200 directly

Hi John,

Thanks. There is, indeed, another menu.

Meridian Integration was checked so that's OK.

Also System Address and Product Address are set correctly. That is to say, they are the same as on the Master DSP configuration menu, both 1.

I understand the source address to be the number of the button whereby the device is selected on the remote. That is also set correctly, as the display on the DSP shows the device name when selected. Previously, I have exchanged button AUX (the 4th button) for the SLS button. I must have also exchanged the name on the G65, which has been communicated to the DSP. As I'm writing this I'm wondering how many other settings have also been carried over from my previous working setup with the G65.

The only configuration setting on the DSP that I do not understand is the Comms Type. I have tried both 4C (for a Meridian Media Server) and NC (for otherwise).

I still have not made any progress. The Master still switches on, then cycles off, while the Slave starts playing the left channel.

I'm close to giving up, unless someone can suggest a new avenue. Is there a way of resetting everything and starting from a blank sheet?

Thanks, Jan