As promised here is a complete breakdown of the parts to service a single DSP5000 (don't forget to double quantities for a pair). I serviced a pair of 7 segment 24/96 upgraded speakers, so yours may be different. Its not difficult to open the backs and check the component values.

     Board   Qty Ea  Value           Manufacturer Part No

     Amp     2       1000uF 16V      Nichicon     UFG1C102MHM
             4       100uF 63V       Nichicon     UFG1J101MPM
             5       10uF 50V        Nichicon     UFG1H100MDM
             2       3.3uF 400V      Ansar        Supersound
             1       680R 5W         Kiwame       n/a
             1       330R 5W         Kiwame       n/a

     DSP     1       2.2uF 400V      Ansar        Supersound
             4       3300uF 6.3V     Nichicon     UFG0J332MHM
             2       2200uF 16V      Nichicon     UFG1C222MHM
             2       1000uF 16V      Nichicon     UFG1C102MHM
             1       1000uF 10V      Nichicon     UFG1A102MHM
             1       1000uF 6.3V     Nichicon     UFG0J102MPM
             2       100uF 10V       Nichicon     UFG1A101MDM
             3       10uF 50V        Nichicon     UFG1H100MDM

     Signal  2       4700uF 25V      Nichicon     UKW1E472MHD

     PSU     2       4700uF 63V      Nichicon     LKG1J472MESCCK

     Display 1       47uF 16V        Nichicon     UFG1C470MEM

Some of the capacitors are a larger physical size than the originals, but they do fit.

I got the most improvement from recapping the amp board. There was a very small benefit from doing the other boards, although it does protect against damage due to component failure.

With respect to the tweeter upgrade, this made little or no difference in my case.


Lounge: DSP5200, 518
Snug: DSP33 x 5, C61R, HD621
Office: M33