Originally Posted by Jdb-si
For those already using the Trinnov processors with Meridian digital speakers, how are you handling the interface from the processor to the DSPs?

It seems the processor does not have SPDIF outputs and the digital out is handled via a different connection.
I did considerable experimentation before I zeroed in on my present config. My configuration involves two amplification channels for Front (8000+sub), and analog speakers all around.

1. I set the 8000SE to 87 statically and took the Coax Digital fronts from Trinnov to the 8000. Used a separate Trinnov analog channel for the Front subs. Used Trinnov analog channels to surround analog speakers. (No 861 in this config).

2. I used Coax Front from Trinnov to 861, and then MHR to 8000. Used a separate Trinnov analog channel for the Front subs. Used Trinnov analog channels to surround analog speakers. (861 in this config).

Finally settled on 2.

In both cases volume control was via Trinnov. I understand that in theory the volume control applied on Trinnov coax out has the potential to degrade it, but
1. extensive reading assured me that this degradation is not that significant
2. I always listen at volumes around reference anyway, never at low volumes; and my listening room is large

I am very happy with the way the Trinnov RC has achieved total balance in the bass between the 8000SE and its (separate) sub, even though they are fed by different channels of the Trinnov. Also am using all the fancy features like 3D placement etc.

Made a world of a difference.

Shankar

Oppo UDP-203, Sonos, Nvidia Streamer, Fire TV 4K, Trinnov Altitude32 into Dan D'Agostino Momentum into Wilson Alexx, Paradigm Sub 1, Monitor Audio In Wall surrounds, JVC NX9