I completed the change and made the front right speaker the master due to the way the cables were installed.

The CD input still doesn't work.
Speaker Calibration still works as before, but not room correction. I specified to only test the front right speaker.

I deleted the subwoofer, center and surround speakers from the configuration (leaving only the pair of 5200 speakers). In the 861 properties tab, I selected the type as "Type 2 All digital, LFE sub". When I downloaded this configuration it resulted in a combination of DSP5200 and DSP5000 speakers in a 7.1 configuration, and a number of sources defined. Is this normal, and is there a way to "reset" the 861 other than setting the type?

When I look at the Type for the full configuration it is set to the name of my configuration file and appears after Type 5. My system has 5 DSP speakers and an analog subwoofer connected with a balanced XLR connection.

I confirmed the firmware version of all of the DSP5200 speakers is ver 1.40 (the latest for non-SL), but noticed that the 861 has ver 8.0 not the latest ver 8.1

Anthem AVM70, 271, DSP7200x2, DSP7200.2HC, DSP5200x4, JL Audio F113,
Oppo UDP203, Panasonic UB9000, Kaleidescape Strato E, Apple TV 4K,
HDFury Vertex2, Epson LS10500, Stewart Filmscreen 110"