I turned the controller setting off on the center channel, and specified Controller on the 861.

I only have 3 sources (ID40, and Sat + Blu-ray connected to the HD621), so I created a CD source and connected it to the analog input.

I selected the CD source, and then started the room correction from MConfig. The results are similar to Robert's, but I also get a "Reading user type 1" after #4 and "Writing user type 1" after #5.

#8 Storing room correction data doesn't appear

#14 Setting volume to 87 is the last line to appear and then I get
Product status error: st="Fail"
Measurement failed

no sound is generated, and the process stops.

I am not sure what the user type 1 messages are.
Maybe I should just start with a new blank configuration file and start again?


Anthem AVM70, 271, DSP7200x2, DSP7200.2HC, DSP5200x4, JL Audio F113,
Oppo UDP203, Panasonic UB9000, Kaleidescape Strato E, Apple TV 4K,
HDFury Vertex2, Epson LS10500, Stewart Filmscreen 110"