Meridian Unplugged - Powered by MrTechGuy.co.uk Forums Discussion Meridian - Systems No noise during Room Correction

It sounds like the 861 stuck in a certain step in the MRC programm for me.
- You can play music and have control.
- You have calibration noise and comms controls.
- You ave checked the input of the DSP that all sources go to D1.

The only "logically" difference for me between the calibration noise and RC-noise is that the 861 software is waiting for an sound input on the analoge card via the mic.
As you get no RC-noise the error message comes up.

So for me only two possibilities:
-The 861RC software part is faulty
-The config file is faulty

So I would make that:
Start two new files from a scratch-means complete new - DO NOT copy.

Only have two sources (ID40 and config an analoge source on A1) without HD421

First file with legacy 5200 (non SL)
Second file with 5200SL

If that also not work I would call the mothership - sorry.