Meridian Unplugged - Powered by MrTechGuy.co.uk Forums Discussion Meridian - Streaming MS600 diagnostic LEDs - how to decode?

Hi all,

My MS600 has been happily participating with either a Sooloos core on MC200 or Roon on an Intel NUC.

But sadly no longer...

The leftmost two LEDs are flashing.
I no longer see the device with the Sooloos Configure PC application either.

What do the two left-most flashing LEDs mean? I've done some googling to no avail.

Thanks in advance

Have you power cycled the switch for the MS600 followed by power cycling the MS600?
Possible firewall issues?
Has your internet service been down?
Bad network cable?
What have you eliminated from blame?

The MC200, Roon core, and MS600 are all connected to the one switch.
The switch is connected to a router.
All devices have been rebooted.

This little ecosystem (with the exception of the Roon core) has been working without a hiccup for over a year.

The Roon core was added recently. Even with it powered off, the MS600 refuses to show itself on the network.

Is there any documentation on what the front panel LEDs on the MS600 mean?

The user guide explains what the LEDs mean.
Look like you need to contact Meridian. MD600 User guide.

Thanks Parky - but that's the MD600 manual. I'm talking about the MS600.

In any case - everyone can relax now and resume normal programming
I pulled the entire network apart and reassembled. Everything is now back to normal.
There's a part of me that would love to know WHY it stopped working, but I'm just relieved to have music!

Cheers
Mark

That is the manual for an MD600, try MS200 User Guide.

EDIT: I see it is all working now, well done.

Russ

Oops, sorry!