Originally Posted by Clever_And_Simple_Peter
Hi Matt,
To answer your questions:
Originally Posted by MattF
I'm not bothered about comms routing, I'd like to know whether the distributor can be configured to deal with the input selection per source (however it gets selected)
Yes it can. This is done using the Meridian Program "Control Window" which is part of the Common Installer pack. This is the USB configuration that you mentioned.
I'm aware that the Control Window program can be used to select which 'Meridian Source' is selected. (i.e. the 'however it gets selected' part)

Are you stating that this can be used to configure which input (the physical socket on the back of the Distributor) is selected per selected source - is this done in a similar manner to the HD421 - i.e. typing in raw ASCII commands, just using the Control Window as a terminal emulator?

Are you also stating that RS232 documentation is no longer available to the public? (i.e. speaker control)

Having to have a round-trip conversation with a representative of Meridian trying to work out each option I might take then trying to verify the answer seems a massive waste of my time when in the past, all it took was looking at a manual / datasheet.

Matt.