I had enormous problems to get one of my MS200s to fire up as a zone after the update. The other one and my MS600 came on stream after rebooting both the endpoint and C15.

The troublesome unit just would not fly, whatever I tried. In the end I was concerned there must be a coincident fault in it, so I swapped it over with another and sure enough it still could not be seen as a zone...

Then I reconnected to its original place in the network and hey presto it came on right away. I have no explanation for this strange behaviour.

NB all my end points are fixed IP addresses. I noticed of course that during the non operating time the offending MS200 could not be pinged, whereas all the others were easily accessible.

Regards
Huw

#1 52KSE 218 LG OLED Sony BRay, Sonos Beam 2
#2 52KSE 218 Pana LED Zenith 2 Naim Muso2
#3 Teac X1 CD, G68, 562v3 518 568 556 G98DH 5K,5KHC 24/96,MS600,Systemdek I920, Ortofon M520, Synthèse Floating 2 Thorens TD160 Ortofon M15e Pioneer DAT Panny Plasma,Humax,BRay.
#4 Panasonic 4K LED Sonos Beam 2
#5 F80 MS200 iDock Sonos Move
#6 MS200 5K 24/96