I get the calibration signal through all 3 speakers... I have left & right mains sound, but nothing from the center. I cycled through all the DSP settings to see if it was something there and had no improvement.
Hi,
I believe the DSP5000C you have is an 18 bit version (88Khz/18bit), whilst the others DSP are 96KHz/24bit.
With a mixed DSP capabilities you will have to set multi-channel DSP preset to limit the output to standard rate audio (max 48.2Khz).
To do this on each multi-channel preset change
HS=Y to HS=N.
The 2 channel ones you can leave as HS=Y.
Hope this helps.
Regards,
Carl
Google Search
|
Meridian Systems
|
Meridian Streaming
|
Restaurant
|
WiKi
|
Duncan's Meridian Info
|
Board Rules
|
Restaurant Rules
