logo

Google Search  |  Meridian Systems  |  Meridian Streaming  |  Restaurant  |  WiKi  |  Duncan's Meridian Info  |  Board Rules  |  Restaurant Rules
Previous Thread
Next Thread
Print Thread
Rate Thread
#239213 2015-08-25 15:00
Joined: Aug 2015
Posts: 19
Harmless
Harmless
Joined: Aug 2015
Posts: 19
I'm new on here and could use some help. My newly acquired G68ADV is running 1.3 firmware and I want to upgrade to 1.5. Can anyone tell me where to download it and help guide me through the install?

FYI... I upgraded to the G68 from a 568 I've had for years, but I've never upgraded Meridian firmware. If this works, I'll also be looking to upgrade the firmware on my DSP5000s and 5000Cs. I have both 24/96 and the older ones.

Thanks.


G68ADV, UHD722, DSP6000s, DSP5500HC, DSP5500 rears, M1500 sub, Oppo 203, 4K FireCube, HTPC, Sony XBR65A9G
Joined: Aug 2011
Posts: 2,171
Likes: 58
Senior Shouting Officer
Senior Shouting Officer
Joined: Aug 2011
Posts: 2,171
Likes: 58
Welcome to the forum.

If you go to Search (towards the top of the page) you can look for "firmware update" or similar & you'll find loads on info there. eg....

Firmware update


Cinema: Meridian 271, 3 x DSP640 (behind screen), 4 x DSP320 (in-ceiling), 4 x DSP3100 (surrounds), 2 x AC12 (interface). 2 x Perlisten D12s subs, Lyngdorf MP40 processor. DT 145" 2.35 AT screen. Sony VW870 projector & S-T lens, Lumagen Radiance Pro.
Lounge: Roon, NUC, Kef LS50 Wireless + 2 x REL Gibraltar-2 subs

Meridian owner since 1998
Ratbert
Unregistered
Ratbert
Unregistered
FW is not available for download, as has been suggested in previous threads the best plan is to contact one of the HH friendly dealers that post on the forum to see if they can help?

Russ

#239238 2015-08-25 19:07
Joined: Aug 2015
Posts: 19
Harmless
Harmless
Joined: Aug 2015
Posts: 19
Thanks so much for you're input, someone has offered to email it to me. Just waiting for it to arrive. I love it here!!! Wish I had joined earlier! smile

Thanks again! smile


G68ADV, UHD722, DSP6000s, DSP5500HC, DSP5500 rears, M1500 sub, Oppo 203, 4K FireCube, HTPC, Sony XBR65A9G
Ratbert
Unregistered
Ratbert
Unregistered
Good to hear you are being assisted, it is a great forum.

Russ

#239256 2015-08-26 15:09
Joined: Aug 2015
Posts: 19
Harmless
Harmless
Joined: Aug 2015
Posts: 19
Received and installed the firmware last night. Tried USB and Comm several times with no luck. Then remembered a post which said older G68s may need to use the serial port. So gave that a try and it worked!

Very happy!!! Great people on here! Thank all of you very much!!! smile


G68ADV, UHD722, DSP6000s, DSP5500HC, DSP5500 rears, M1500 sub, Oppo 203, 4K FireCube, HTPC, Sony XBR65A9G
Joined: Oct 2010
Posts: 12
Harmless
Harmless
Offline
Joined: Oct 2010
Posts: 12
Hello,

I just got a G68, firmware version is old (1.11).
Could one of you please help me (PM) get version 1.44 and 1.50 (both please, I read people may prefer with or without apodizing and I would like to try both).
Thanks a lot.

Best regards
Olivier

Joined: Oct 2010
Posts: 12
Harmless
Harmless
Offline
Joined: Oct 2010
Posts: 12
Hello,

Could someone please help me with the firmware (post just above)?

Best regards
Olivier

Joined: May 2008
Posts: 8,505
Likes: 78
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: May 2008
Posts: 8,505
Likes: 78
Hi,

Firmware should be available from your local dealer or failing that I suggest you contact one of the HH friendly dealers that post on here.

I'll PM you their contact details, I'm sure someone will be able to help you.

Regards,
Carl


861v6+ID40, HD621, 8000.2, 7200HC, 7200.2, SKYQ Silver, PS3, PDP-LX6090, QNAP TS870-Pro (8*6TB), Roon, iPadAir2.
[In Reserve] C15, MD600 (2*3TB), TwinStore RM (2*2TB)
Joined: Oct 2010
Posts: 12
Harmless
Harmless
Offline
Joined: Oct 2010
Posts: 12
Hello,

The forum is great, I am now the happy owner of a G68 with 1.5 firmware.

Thank you all
Olivier

Joined: Jul 2018
Posts: 123
Likes: 15
Hitchhiker
Hitchhiker
Offline
Joined: Jul 2018
Posts: 123
Likes: 15
Hi all!

I restart the topic because I am the proud owner of an old G68... with firmware 1.3 ... frown

Does anyone still have a 1.50 firmware?
I do not have a dealer near (except if I accept to drive 300 km)

Thanks!


861v6 + HD621 / Cabasse Baltic
Joined: May 2008
Posts: 8,505
Likes: 78
President of the Imperial Galactic Government
President of the Imperial Galactic Government
Joined: May 2008
Posts: 8,505
Likes: 78
Originally Posted by Carl
Hi,

Firmware should be available from your local dealer or failing that I suggest you contact one of the HH friendly dealers that post on here.

I'll PM you their contact details, I'm sure someone will be able to help you.

Regards,
Carl
I've PMed you.


861v6+ID40, HD621, 8000.2, 7200HC, 7200.2, SKYQ Silver, PS3, PDP-LX6090, QNAP TS870-Pro (8*6TB), Roon, iPadAir2.
[In Reserve] C15, MD600 (2*3TB), TwinStore RM (2*2TB)

Moderated by  Carl, Duncs, ncpl 

Link Copied to Clipboard
Who's Online Now
0 members (), 23 guests, and 2 robots.
Key: Admin, Global Mod, Mod
Newest Members
Kiran1103, Tony999, PhilP, Grover, Humberto
5,503 Registered Users
Top Posters(30 Days)
IanP 8
Alm 7
Top Posters
VirusKiller 12,733
ncpl 8,811
Carl 8,505
Fiddler 8,364
Ian 7,950
Forum Statistics
Forums18
Topics31,141
Posts296,882
Members5,503
Most Online4,788
May 22nd, 2026
Meridian  |  Media Centre  |  Support  |  Firmware Release Notes  |  RSS Systems  |  RSS Streaming  |  RSS Restaurant

Website Provided by Mr Tech Guy - Resolute Audio Visual Limited © 2026

Powered by UBB.threads™ PHP Forum Software 8.0.1
(Release build 20251126)
Responsive Width:

PHP: 8.5.8 Page Time: 0.053s Queries: 39 (0.026s) Memory: 0.8759 MB (Peak: 2.2175 MB) Data Comp: Off Server Time: 2026-07-26 06:13:20 UTC
Valid HTML 5 and Valid CSS