My TwinStore will not power on after I came back from a 3 week trip. I usually power off my Control:10 MS600 and TwinStore when I'm going to be out of pocket for more than a week.
I tried unplugging/plugging in my Control:10 and TwinStore the Control:10 came on the TwinStore did not. I took the plug for the Control:10 and plugged into the TwinStore no luck the TwinStore did not power up.
When I look at the TwinStore from an overhead view I see red lights I'm assuming it the drive. I believe I may have a motherboard failure. Has anyone here experienced the same scenario that I have described?
What would be the replacement cost for a new mother board (I bought an early gen TwinStore in summer of 2008 I believe. Should I skip having my TwinStore service and go directly to a QNAP solution?
Thank in advance for your feedback!
MS600, Roon, Qnap, NUC SSD, Prime Amp, Boulder 865 integrated amp, G65, hd-722, Apple TV 4K, Xbox One X, PS4, Jl Audio fantom 113, Wilson Sophia 3, Transparent Ultra ic/speaker cables, Oppo 203, Sony A1E, Audeze LCD-X, Focal Clear
I read on the forum about a problem with a connection wire that is easily fixed with solder as opposed to the original plug.
Worth looking into I would think Chris
No 18 in the Hall of fame I have simple tastes; I am content to settle for the best: GIK monster bass panels, rear wall. QNAP TVS 471i3. Roon into DSP5200SE via 210/ 218 zone... Explorer 2. Bluesound Pulse 2, Mini & Flex. 596v1, 518, Foxsat HD, Sony BDP, Pioneer 5090, 2 Chromecast's for LRB videos. MS200 to F80 for a Roon zone
Google Search
|
Meridian Systems
|
Meridian Streaming
|
Restaurant
|
WiKi
|
Duncan's Meridian Info
|
Board Rules
|
Restaurant Rules
