Meridian Unplugged - Powered by MrTechGuy.co.uk Forums Discussion Meridian - Systems 568.2 new firmware process

DSP fan,

The M directions worked for the most part for me too. I did have a problem loading the up to date Winfup. It wouldn't load on my Windows 95 laptop. I used the older version I already had installed and everything worked fine. I had to copy all the files into a directory for the winfup to recognize the files. Don't know why that happened. Anyway, it seems most other people have had good luck with the supplied directions.

After the file update I loaded my Type settings into the configuration software and selected 2.50 or better. I then needed to delete any user created settings since the new software is a lot different. The old Cinema needs to be deleted for there is a new Cinema preset. It might be better to start from scratch with your type settings. Write down your speaker distances and volume settings if you don't remember them all. The worse that could happen is you would need to start from scratch if your modified type setting doesn't work. Give it a shot...don't worry it will all work out for you.

Ron