Meridian USA VP Ken Forsythe previewing the new Meridian DSP320 wall/ceiling speakers at CEDIA that would make excellent luxury HT Atmos ceiling speakers :-)
I was hoping for something a little smaller, something with a similar foot print (or should that be hand print) to the M80\F80.
It's good that Atmos is at least being mentioned in their recent discussions.
Main system - Sources (Kodi-HTPC, Vero 4k, FireTV, Sat) into Trinnov Altitude 32 (8-16) (+Roon), Trinnov Amplitude 8 amp & Vivid Audio (Giya G3, V1.5) and REL Stentor III speakers. Others: F80 + Raspberry Pi and other Pi systems.
Does this suggest that M has an update coming to the 861 and/or HD621? Can we do Atmos with the current configuration, if M sticks with the policy of the player processing to PCM?
I assume one can just add more cards to the 861, but does it have the processing power? Can the HD621 pass all the necessary channels?
I wonder if M is saying Atmos, or is the commentator mearly assuming?
Primary: MD600, MS200 (SpeakerLink to AES), Trinnov ST-2, Ayre V6-xe, Salk SS8 3x LRC. Secondary: MC600 (whole house). Zone one: 568.2, G57, MS200, Spatial Hologram M2SE. Zone 2-6 (Awaiting assignment).
IMHO it would have to be a major HD621 upgrade so it could handle bitstream and pass extra channels to an enhanced 861.
M see the 861 as an audio temple and I can't see them putting an HDMI decoding capacity\input anywhere near it.
Main system - Sources (Kodi-HTPC, Vero 4k, FireTV, Sat) into Trinnov Altitude 32 (8-16) (+Roon), Trinnov Amplitude 8 amp & Vivid Audio (Giya G3, V1.5) and REL Stentor III speakers. Others: F80 + Raspberry Pi and other Pi systems.
Main system - Sources (Kodi-HTPC, Vero 4k, FireTV, Sat) into Trinnov Altitude 32 (8-16) (+Roon), Trinnov Amplitude 8 amp & Vivid Audio (Giya G3, V1.5) and REL Stentor III speakers. Others: F80 + Raspberry Pi and other Pi systems.
Naturally - it will be done afterwards so that you can buy it again, after the ltd edition multi-disc version....which then follows the director's cut, then the anniversary edition; extended version.
I know that Gravity, for example, was released in Theatres using Atmos... and now the Bluray as well... but I believe that Atmos has to be there from the get-go, rather than post-conversion after the Cinema release.
No doubt the Atmos Processor can simulate or add "Atmos Type Effects", but if the Cinema release isn't a native Atmos encoding, then post-conversion isn't a runner I believe.
Main system - Sources (Kodi-HTPC, Vero 4k, FireTV, Sat) into Trinnov Altitude 32 (8-16) (+Roon), Trinnov Amplitude 8 amp & Vivid Audio (Giya G3, V1.5) and REL Stentor III speakers. Others: F80 + Raspberry Pi and other Pi systems.